Bridging biological and chemical solutions in twospotted spider mite control

A robust IPM program that combines multiple mite controls can help keep twospotted spider mite populations in check.

Extensive visible webbing is a sign of major infestation.
Photos © Adobestock

The most problematic mite reported by Greenhouse Management magazine readers for the past two years is the twospotted spider mite.

In this year’s Miticide Market Report, 87% reported having an issue with the pests, and in 2025, 77% indicated twospotted spider mites were the most problematic of all mites.

Those who experienced twospotted spider mite pressure in 2026 report using a variety of control measures, including biological controls (69%), botanical or natural products (66%) and synthetic miticides (61%). With the right precautions and timing, biocontrols and synthetic miticides can be used together.

Understanding what’s being fought, the type of biocontrol that works best and the modes of action of synthetic miticides will help build a strong integrated pest management foundation that bridges the gap between biological and chemical solutions.

 

Twospotted spider mite facts

These and all mites belong to the order Acari of the class Arachnida. They have a compact oblong or oval body, because the head, thorax and abdomen appear not to be separated. They are wingless.

Fertilization determines mites’ sex in many mite species. Males come from unfertilized eggs, while females come from fertilized eggs. They progress through four stages of development: egg, larva, nymph and adult. Once out of the egg as colorless larvae, they immediately start feeding on sap from leaves. At this stage, the larvae only have six legs.

When another pair of legs emerge, they become nymphs, and the dual spots that characterize the twospotted species are most visible. The spots are sap the nymph has eaten, seen through the semi-transparent wall of its body.

It can take as long as 19 days and as few as seven to reach adulthood (faster at higher temperatures), and mites will never stop feeding during this progression. One female twospotted spider mite can lay up to 100 eggs during its four-week lifespan.

Male and females can be differentiated by size, with males smaller than females. They can be colored from a slight green to an orange hue, but they always have dark spots on the sides of their bodies.

They prefer the undersides of leaves for protection and feed by piercing and sucking sap from leaves. Mites can feed on over 300 different species of plants and thrive in hot and dry conditions, which allow them to reproduce and develop faster.

Female mites will go into a dormant stage known as diapause as food becomes scarce and temperatures drop. They can overwinter in greenhouse cracks and crevices, where they can be difficult to detect before they emerge in warmer weather.

Mite feeding reduces chlorophyll, which inhibits photosynthesis. Mature leaves damaged by twospotted spider mites will have stippling. Serious infestation will cause leaves to turn yellow. A major infestation is marked by the webbing they produce and leave on plants.

The dual spots that characterize the species are most visible when they are nymphs.

Scouting for twospotted spider mites

Because they are 1⁄50-inch (0.5 mm) or less in diameter, twospotted spider mites are difficult to detect. Often, plant damage is apparent before they are noticed.

Weekly scouting is recommended because they are easiest to control when caught early, particularly in the hottest and dryest portions of the greenhouse. A 10X or 15X hand magnifier is required to see them, and employees should examine the underside of the oldest and lowest leaves for webbing, cast off skins or live mites.

One of the simplest methods to detect mites is to shake or hit a plant over a sheet of white paper and look for specks moving on the sheet. The use of sticky cards is ineffective. Scout at the end of the day, when mites are less likely to be carried on clothing to other plant populations in the greenhouse.

Effective biological controls for twospotted spider mites

There are a variety of predatory mites and insects that naturally feed on twospotted spider mites. But not every predatory insect will work well to control the mites. It’s best to lean on specialists. The University of Connecticut Department of Plant Science and Landscape Architecture and UConn Extension lists a few options for growers in its fact sheet “Biological Control of Two-Spotted Spider Mites.” These include:

Phytoseiulus persimilis

Adult Phytoseiulus persimilis is a specialist predatory mite that feeds on all stages of twospotted spider mites. The adult P. persimilis is bright red in color, pear-shaped, long-legged, slightly larger and more active than twospotted spider mites. Adult females lay eggs that are about three times the size of twospotted spider mite eggs and are more football-shaped than the round twospotted spider mite eggs.

The development time for P. persimilis is shorter than for twospotted spider mites. Optimum conditions are relative humidity above 75% and temperatures over 68 °F. It does not go into a diapause stage.

P. persimilis is attracted to the chemical odors produced by plants infected with spider mites, as it searches for its prey by touch and scent. Both adults and nymphs actively search plants for twospotted spider mites. P. persimilis can spread through a greenhouse as long as plant leaves are in contact with each other.

Neoseiulus (Amblyseius) californicus

Neoseiulus (previously Amblyseius) californicus is a slower-acting predatory mite than P. persimilis but has a broader host range than P. persimilis and survives longer in the absence of prey by feeding upon other plant feeding mites (such as broad and cyclamen mites) and thrips. N. californicus may also feed on mold, nectar and pollen.

This slow-acting predatory mite is useful for keeping low twospotted spider mite populations under control and can be released preventively. In situations where high temperature or relative humidity variations can occur, N. californicus may be a better choice than P. persmilis. You can also release N. californicus in combination with P. persmilis.

Mature leaves damaged by twospotted spider mites will have stippling. Serious infestation will cause leaves to turn yellow.

Feltiella acarisuga

A small (1/16-inch long) predatory gall midge, Feltiella acarisuga feeds on twospotted spider mites. Adults live for two to three days, are more active at night and rest during the day on the underside of leaves. Females lay orange to red eggs among the twospotted spider mite colonies, and eggs hatch in three to five days. The larvae stage is the only predacious stage. Adults emerge from the pupae.

This predatory midge develops from egg to adult in 10 days at 80 °F and 34 days at 59 °F with relative humidity between 60 and 95%. Extended periods of relative humidity below 60% may reduce their survival and reproduction; optimal relative humidity is 80%.

Feltiella is shipped in the pupal stage, and adults emerge soon after arrival. They are best released late at night or early in the morning. Adults are excellent flyers, so they may be able to reach hanging baskets and other hard-to-reach ornamental crops.

Stethorus punctillum

This small (1/10-inch long), black, predatory beetle feeds on all life stages of twospotted spider mites. Adults can fly, allowing them to locate colonies that are not accessible to predatory mites. They lay their yellow oval eggs one at a time in or near mite colonies. Larvae are slow-moving with conspicuous legs. Larvae and adults feed on all stages of twospotted spider mites.

Optimal conditions are moderate to high temperatures (61 to 90 °F). They can also feed on small arthropod eggs, aphids, nectar and pollen. These predatory beetles are best used in combination with predatory mites.

One female twospotted spider mite can lay up to 100 eggs during its four-week lifespan.

Effective chemical controls for twospotted spider mites

Miticides (acaricides) are routinely applied to suppress or mitigate twospotted spider mite populations from reaching damaging levels, which can reduce substantial damage to plants. However, the twospotted spider mite can rapidly develop resistance to many pesticides (both insecticides and miticides).

Several commercially available miticides, including Acequinocyl (tradename Shuttle), are known as mitochondria electron transport inhibitors, or METI. In general, METI are active on all life stages of twospotted spider mites, including the egg, larva, nymph and adult. Studies have shown that METI miticides are only active as contact miticides and more active on the nymph and adult life stages of the twospotted spider mite.

Other miticides, such as spiromesifen (Savate) and spirotetramat (Kontos), have translaminar activity, meaning the active ingredient remains effective even after residue on the leaves dry. METI works by disrupting or inhibiting energy production, which leads to rapid paralysis and death.

The METI miticides are effective against most twospotted spider mite life stages; however, it is important to avoid using METI miticides in succession (back-to-back) in spray programs to prevent populations from developing resistance.

How to integrate bio and chemical controls

There are ways to help ensure that both biological controls and chemical controls can work well in IPM programs. Envu has a few recommended practices that include:

  • Establish biocontrol populations early, before pest pressure builds up, as biocontrols are most effective in managing low to moderate pest pressures.
  • Save traditional chemistry options for pests that aren’t well-controlled by biocontrols or when a pest population exceeds the economic threshold.
  • Consider different approaches for different phases of the crop cycle. For example, you may exclusively use biocontrols in propagation before incorporating traditional chemistry in finished crops.
  • Consider using banker plants that can support a beneficial insect population and remain untreated.
  • Where possible, choose application methods that limit the exposure of biocontrols to pesticides. For example, use drench applications for biocontrols that live in the plant canopy. Use foliar applications for soil dwelling and drench-applied biocontrols.
  • Time application to align with the least-susceptible life stage of the biocontrol. Some traditional chemistry is more toxic to one life stage but can be used safely with another.
  • Use spot treatments to control hot spots of pest pressure rather than treating the entire crop area with traditional chemistry.
  • When using traditional chemistry, choose options that are inherently less toxic to non-target insects. Avoid broad spectrum and non-selective products. Contact your chemical and biocontrol providers for more information on the compatibility of specific products.

Information sourced from Envu; UMass Extension Greenhouse Crops and Floriculture Program; Stanley Swier, extension specialist emeritus, entomology, University of New Hampshire; University of Connecticut Department of Plant Science and Landscape Architecture; UConn Extension Integrated Pest Management Program; and Raymond Cloyd, extension specialist, horticultural entomology/plant protection, Kansas State University Department of Entomology.

Read the full 2026 Miticide Market Report:

From the Sponsor: Prioritize a rotational approach to mite management for superior results

Research: Measuring mite madness

Resistance: What causes insecticide resistance?

April 2026
Explore the April 2026 Issue

Check out more from this issue and find your next story to read.

Switch Website: Greenhouse Management