Editor's Note: This article originally appeared in the August 2026 print edition of Greenhouse Management under the headline “More color, more growth.”

Most foliage plants used as indoor houseplants are native to tropical and subtropical regions, where environmental conditions are characterized by warm temperatures, high rainfall and relatively constant daylengths throughout the year. They also are often understory plants that grow beneath forest canopies, where light levels are low and filtered by taller vegetation.
As a result, these species are generally shade-adapted, have low light requirements, are sensitive to temperatures below 50 °F and typically exhibit day-neutral photoperiodic responses.
Although most foliage plants are not strongly photoperiodic, some species show growth and flowering responses to changes in daylength. For example, photoperiod can influence stolon formation (plantlets) in spider plants (Chlorophytum comosum) and flowering in emerald ripple peperomia (Peperomia caperata).
Similarly, temperature has been shown to exert strong, species-specific effects on foliage growth, and optimal temperatures for growth differ widely among species such as English ivy, weeping fig, dumb cane, pothos and Boston fern. Light requirements similarly vary, though most foliage plants reach saturation at relatively low light intensities of 100 to 400 µmol·m⁻² · s⁻¹.
Despite this existing knowledge, there remains a limited understanding of how environmental parameters that can be controlled in greenhouses interact to affect foliage plant growth and development, particularly in northern latitudes, where supplemental and photoperiodic lighting are often utilized, and temperatures can be generally maintained in the winter.

The study
Our goal with this research was to investigate whether incorporating day-night temperature differentials, in combination with long days and low-to-moderate daily light integrals (DLIs), could reduce the production time of Philodendron erubescens ‘Birkin’ (also sold as White Wave), Callisia repens ‘Pink Panther’, Pilea peperomioides (Chinese money plant), Peperomia obtipan ‘Citrus Twist’, Epipremnum aureum ‘Marble Queen’ and Monstera adansonii without adversely affecting foliage color, height or stem length and quality.
Vegetative cuttings were rooted, whereas ‘Birkin’ was obtained as tissue culture plantlets. Rooted cuttings were transplanted into containers and randomly assigned to greenhouse compartments representing 24 combinations of air temperature, photoperiod and DLI.
The treatments included average daily air temperatures (ADT; 68, 73, 79 and 84 °F); three photoperiods (16, 20 and 24 hours); and two DLIs (4.5 and 9 mol·m⁻² · d⁻¹).
Specifically, the air ADT (day temperature/night temperature) setpoints under the 16-hour photoperiod in °F were 68 (73 °F for 16 hours / 59 °F for eight hours), 73 (78 °F for 16 hours / 64 °F for eight hours), 79 (83 °F for 16 hours / 70 °F for eight hours) or 84 (89 °F for 16 hours / 75 °F for eight hours).
Under the 20-hour photoperiod, the ADT setpoints in °F were 68 (70 °F for 20 hours / 59 °F for four hours), 73 (75 °F for 20 hours / 64 °F for four hours), 79 (81 °F for 20 hours / 70 °F for four hours) or 84 (86 °F for 20 hours / 75 °F for four hours).
Under the 24-hour photoperiod, the ADT setpoints were 68, 73, 79 or 84 °F.

What we found
For Philodendron erubescens ‘Birkin’, height and leaf area increased as average daily air temperature increased from 68 to 84 °F, whereas stem diameter increased under daylengths greater than 16 hours. Most importantly, increasing temperature adversely affected ornamental quality: ‘Birkin’ lost variegation and exhibited chlorosis at ADT above 79 °F, particularly under continuous lighting (24 hours), thereby reducing its marketability despite increased growth (Figure 1).
Callisia repens ‘Pink Panther’ responded strongly to both light and temperature. Plants were tallest under a DLI of 4.5 mol·m⁻² · d⁻¹ and contained the highest anthocyanin pigment levels (pink color) at the highest ADT (84 °F), and a DLI of 9 mol·m⁻² · d⁻¹under both 16- and 24-hour photoperiods.
Plant size generally increased with longer daylengths and higher DLI, demonstrating that both light duration and quantity promoted biomass accumulation. Stem diameter, however, was not significantly affected by environmental treatments.
Pilea peperomioides exhibited sensitivity to elevated temperatures and extended photoperiods. Height, stem diameter, number of offshoots, leaf number, leaf area and growth will all be influenced by the interaction among temperature, DLI and photoperiod. Increasing temperature and DLI reduced stem elongation and thickness, particularly under continuous lighting.
The largest plants were those grown at moderate ADTs (68 to 73 °F) and declined sharply at 84 °F, especially under low DLI and greater than 20-hour photoperiods. Leaf chlorosis was observed under high-temperature and extended daylength conditions, indicating stress and reduced aesthetic quality. Overall, the most favorable growth occurred at ADT between 60 and 73 °F, under a DLI of 7 to 9 mol·m⁻² · d⁻¹ and a 16-hour photoperiod (Figure 2).
Peperomia obtipan ‘Citrus Twist’ exhibited similar responses. Air ADT influenced height, while stem diameter and leaf area responded to the interaction of ADT, DLI and photoperiod. Growth parameters such as branch number, leaf number and biomass accumulation increased with higher DLI but declined at temperatures above 73 °F.
The most significant overall growth and biomass accumulation occurred at 73 °F under a 24-hour photoperiod and DLI of 7 to 9 mol·m⁻² · d⁻¹, whereas higher temperatures led to reduced leaf area and growth.

Epipremnum aureum ‘Marble Queen’ demonstrated greater tolerance to a range of environmental conditions. Stem length increased with increasing DLI, while stem diameter decreased slightly at higher temperatures. Leaf number, leaf area and biomass accumulation increased with higher DLIs and longer daylengths.
Unlike some other species, ‘Marble Queen’ benefited from extended lighting and higher light levels and temperatures, producing greater biomass without severe quality losses.
Monstera adansonii responded positively to higher temperatures, longer days and higher DLIs. Stem length increased with increasing temperature, branch number increased with higher DLI and leaf number increased with both factors.
Leaf area and shoot dry mass were greatest under continuous lighting and high DLI (Figure 3). The largest plants were produced at 84 °F, a DLI of 7 to 9 mol·m⁻² · d⁻¹ and a 24-hour photoperiod, indicating that this species is well-adapted to warm, high-light production environments.
Photosynthetic measurements provided a physiological context for these growth responses. In P. obtipan, photosynthesis increased rapidly at low light levels and saturated near 100 µmol·m⁻² · s⁻¹, consistent with shade adaptation and indoor environments. These physiological constraints help explain the reduced growth and biomass accumulation observed under hot, extended-day conditions.
Take-home message
Foliage plants exhibit distinct, species-specific responses to environmental factors. While some species, such as P. erubescens, E. aureum and M. adansonii, accumulated the greatest biomass under high temperatures, long photoperiods and higher DLIs, these conditions compromised ornamental quality in other species through chlorosis or loss of variegation.
In contrast, P. peperomioides and P. obtipan performed best at moderate temperatures less than 73 °F, consistent with their native habitats. Anthocyanin accumulation in C. repens was strongly influenced by environmental stress and light availability. Higher temperatures and higher DLI enhanced pigmentation, whereas suboptimal light and temperature suppressed accumulation.
These findings align with previous reports that anthocyanins increase under temperature stress or large day-night temperature differences.
Notably, the study demonstrated that incorporating day-night temperature differentials (warm day and cooler night) improved plant quality and performance compared with our previous studies using constant day-night temperatures.
These results underscore the need for genus-specific production strategies rather than uniform environmental management across all foliage crops. Tailoring temperature and lighting regimes to individual genera is essential to maximize biomass accumulation, maintain aesthetic quality and improve overall production efficiency in greenhouse foliage plant systems.
Explore the August 2026 Issue
Check out more from this issue and find your next story to read.
Latest from Greenhouse Management
- The Growth Industry Episode 17: Investing in IGCs with WorryFree® Plants
- New UF study sheds light on the hidden toll of back pain among horticulture workers
- 2026 Irrigation and Automation Market Report: Tradition rains
- Empowering the Future of Precision Cultivation: Resource Efficiency, Root-Zone Science and Scalable Automation
- Oasis Grower Solutions hires plant scientist Timothy Frey
- New green industry leadership development program for women now available
- Clean production protocol
- Jiffy hosting Microgreens Grower Day