Editor's Note: This article originally appeared in the July 2026 print edition of Greenhouse Management under the headline “Trial and error.”

According to The Ohio State University sustainable greenhouse and nursery specialist W. Garrett Owen, growers conducting their own growing media trials is both practical and beneficial.
“It’s totally doable, and it’s probably one of the things most recommended (to growers) before they make a switch to a substrate or a new mix,” Owen says. “This will give them, or their team of growers, an idea of how the substrate performs, how the plants perform (in the substrate) and any cultural practices required.”
Growers need a control — the substrate already in use — to establish a baseline. He also recommends growing one plant per pot instead of trying to do a trial with combos or multiple plants in a pot.
“Have at least six pots of that new substrate,” he says. “Try to incorporate different container sizes, too, to see how it works with the pot-filling machinery you have.”
Here are five steps Owen recommends when embarking on an in-house growing media trial.
Step 1: Know why
Owen says the first step is to know your why.
“Is it because you’re not happy with the performance of your previous mix, or is it based off of price?” he says, noting that both are valid reasons for considering a switch.
General plant performance, availability and sustainability are other common reasons for switching up growing media, Owen says.
Step 2: Obtain the necessary materials
After figuring out your “why,” Owen says it’s important to look at products currently in use and find ones with a similar profile. He suggests contacting manufacturers to talk to a sales rep and/or a technical representative about trials.
“In some instances, they will provide samples that you can physically see,” Owen says. “It may not be enough to produce a (production) trial, but it’s a place to start.”
Cultivate or other trade shows are other instances where growers may obtain samples. Substrate companies can also help growers determine how big a trial should be.

Step 3: Setting up the trial properly
To get started on a trial, Owen says it’s vital to properly label all components of the containers to collect accurate data.
“I know in some instances, growers will block the treatments in a certain section of the greenhouse and not label everything,” he says. “Overall, it’s about documentation. If you start off right, document everything you’re doing and have someone or multiple people dedicated to keeping track of what’s happening, you’re being dedicated to seeing if making the switch is the right decision.”
This goes hand in hand with choosing the plant material and setting parameters for the trial, he says. Blocking pots for the trial is usually an efficient way to organize it so irrigation will be more uniform. Growers may also consider placing properly labeled pots amid non-trial plant material to see how a new mix or substrate performs side by side within normal growing conditions and cultural practices.
Step 4: Run the trial
When running the trial, Owen says proper data collection is a must.
“Know the actual start date of the trial,” he says. “In terms of knowing what substrates are being used and in what containers, label them and number them. For instance, you’ll know that substrate X is in containers 1 to 50; substrate Y is in 51 to 100. And I’d encourage growers to start off by using a 1-2 dilution test or saturated media extraction test, so they have a baseline of the pH and EC measurements of the substrate prior to planting.”
Owen says a free online tool at e-gro.org shows growers how to properly perform pH and EC tests. Substrate companies can help, too, he says.
As the trial progresses, Owen says growers should monitor their pH and EC weekly by doing a PourThru test. To learn more about these tests, see Owen’s article here: bit.ly/pour-through-help.Monitoring light, temperature and what chemicals are used are noteworthy to document. A PGR drench, for instance, can be tested in a trial, but it should be its own subgroup in the trial, Owen says.
He adds that growers should take photos when they do weekly testing so they can see a progression of plant growth as the trial goes on.
“They can take either a single plant photo or single and group shots continually in case they may not have time to take observational data and notes,” Owen says. “Growers are busy, and they may forget to write down that leaves are turning yellow. Photos can help them jog their memory after the trial has been performed.”
Step 5: Make an informed decision
When the trial is completed, Owen says to compile data collected (perhaps inputting it in Microsoft Excel and plotting it) and see how pH and EC levels varied over the course of the trial. That information, combined with grower observations, photos, product price information and other notes, is the best way to make the decision about whether to make a growing media switch.
“‘How does this actually compare to our control?’ is the question you have to ask at the end of the trial and how plant growth or finished plant quality compares,” Owen says. “Look at the photos. See how your plants grew in the different substrates you trialed. Are they similar quality or superior to what you were growing before? And does it make sense financially after crunching the numbers? Line everything up at the end to make a choice.”
Read more from the 2026 Growing Media Market Report:
From the Sponsor: A shared passion for growing
Research: Quality blend
Sponsored Content: The pH truth
Explore the July 2026 Issue
Check out more from this issue and find your next story to read.